![]() Increase the capacity of existing fiber with WDM wavelengths (when used with multiplexers).Maintain investments in existing equipment.Increase network distances by converting UTP to fiber and extending fiber links.New network services are driving up bandwidth demand.Budget constraints are pushing preservation of capital investment in legacy switches and routers.LANs and WANs are converging, and networks are growing in physical area.They support a wide variety of protocols, data rates and media types to create a more reliable and cost-effective network. Media converters provide seamless integration of copper and fiber, and different fiber types in Enterprise LAN networks. Media converters present solutions to these problems, by allowing the use of fiber when it is needed, and integrating new equipment into existing cabling infrastructure. Network complexity, demanding applications, and the growing number of devices on the network are driving network speeds and bandwidth requirements higher and forcing longer distance requirements within the Local Area Network (LAN). Media converters can also convert between wavelengths for Wavelength Division Multiplexing (WDM) applications.ĭeployed in Enterprise, Government, Data Center, and Telecom Fiber to the x networks, media converters have become the Swiss army knife of networking to enable connectivity and fiber distance extension. Media converters are typically protocol specific and are available to support a wide variety of network types and data rates. Media converters are available as Physical Layer or Layer 2 switching devices, and can provide rate-switching and other advanced switching features like VLAN tagging. Copper-to-fiber conversion using media converters enables two network devices with copper ports to be connected over extended distances via fiber optic cabling. The most common type of media converter is a device that functions as a transceiver converting the electrical signal used in copper Unshielded Twisted Pair (UTP) network cabling into light waves used in fiber optic cabling.įiber optic connectivity is necessary when the distance between two network devices exceeds the transmission distance of copper cabling. Media converters are flexible and cost-effective devices for implementing and optimizing fiber links in all types of networks. ST: 4.6 oz (130 g) / SC: 4.6 oz (129 g) / FC: 4.Media Converter Overview What is a Media Converter? Multi-Mode: -15dBm(Min) -10dBm(Typical) -8dBm(Max) Single-Mode: -8dBm(Min) -7dBm(Typical) -5dBm(Max) IEEE802.3 10Base-T IEEE802.3u 100Base-TX and 100Base-FXĩ to 30V DC (External AC to DC power adapter included)ĩV DC / 500mA (Input: 100~240V AC 50/60Hz, US type A plug)Īuto-negotiation for half / full-duplex and 10 / 100M on TX port Auto-MDIX on TX portġ0BaseT: 10 / 20Mbps for half / full-duplex ġ00BaseT: 100 / 200Mbps for half / full-duplex SG12/04213, strictly certified by SGS), and we back our high-quality products with a 5-year replacement warranty and a 30-day risk-free money-back guarantee. A separate external power supply is included in the package.ĬommFront's products quality is ensured by our ISO-9001 quality control system ( Cert No. Thanks to the professional and unique casing design, the product can be mounted directly on a wall, panel or DIN Rail, without a need of using any unsecured DIN-Rail or wall-mount brackets. The FBR-Ethernet-2 (SM / ST) comes with ST connectors for fiber optic links and can extend the 10 / 100M Ethernet distance to 12.4 miles (20 km). It features auto-negotiation for half or full-duplex and 10 or 100Mbps data rates, and supports MDI (straight-through) and MDIX (crossover) cables, therefore, no DIP switch, jumper settings or software drivers are required, making the unit a highly reliable and truly plug-and-play device. ![]() This industrial Ethernet-to-Fiber-Optic converter operates within a temperature range of -40✯ to 185✯ (-40✬ to 85✬), and features 600W surge protection and 15kV ESD static protection. Besides the capability of long distance data transmission and the large carrying capacity, fiber lines are inherently resistant to EMI / RFI, lightning, transient surges and ground loops therefore, they are ideal for data communications surrounded by heavy electrical or radio interference. The FBR-Ethernet-2 (SM / ST) is a single-mode (SM), rugged, industrial-grade 10 / 100M Ethernet to fiber optic media converter, which provides one channel for media conversion between 10 / 100BaseTX and 100BaseFX. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |